Filter
Top Products
The Administrator Application
30
E-mail - Check to enable (or delete) periods during which e-mail alerts will
be sent for events for the selected camera. Before setting up e-mail alerts,
e-mail must be configured in the General Settings dialog, also available
from the main Administrator application. See E-mail Setup, on page 28.
Sound - Check to add (or delete) sound alerts for events for the selected
camera. The sound file used must be located in the AXIS Camera Recorder
directory and the file must be named alarm.wav. To use a sound other
than the default one, simply rename your new file alarm.wav.
Camera - Select a camera from the list. All operations performed in the
Scheduler will only apply to the currently selected camera.
Copy Schedule - Creates a copy of the current schedule so that it can be
used for other cameras.
Paste Schedule - Pastes the copied schedule setup to the currently selected
camera. To copy to further cameras, simply select the next camera and
paste it there as well. Take care when pasting, as schedules are overwritten
with no warning.
Setting up Schedules - an Example
Follow these instructions to set up a simple schedule for putting cameras
on line at set times and for triggering them by events and sending e-mail
alerts at all other times.
1. From, the Mode drop-down list, select Add.
2. Check the box for Online, to add time periods in which the camera
will be active.
3. To zoom in on the hours of the day, hold the cursor over the name of a
day until the cursor changes to a magnifying glass and then click on
the name.
4. Drag the cursor from Monday 08:00 to Friday 18:00 and release the
mouse button.
5. A small dialog box will now appear. Select whether to activate the
cameras for the whole period specified, i.e. Always, or only On event,
i.e. when an alarm occurs, but still only within the specified period.
Select Always.