Filter
Top Products
The Administrator Application
29
Scheduling Camera Activity and Alert Periods
Using a a one-week calendar, the built-in Scheduler provides automatic
control over important system functions. The main principle for
scheduling is to click and drag in the window to create (or delete) a time
period, during which various functions will be enabled:
• Time-controlled starting and stopping of the selected camera (Online)
• Event-controlled ((via external sensors) starting and stopping of the
camera (Online)
• E-mail alerts on motion detection
• Sound alerts on motion detection
The Scheduler is activated from the main Administrator window, by
pressing the Scheduler button. The following window appears:
Figure 9 - The Scheduler window.
The following functions are available:
Mode - The selected mode determines if time periods are added or deleted
when clicking and dragging the mouse in the window. Only the functions
selected (Online, e-mail, Sound) will actually be affected by the operation.
Online - Check this box to create (or delete) online periods for the selected
camera, i.e. when the camera will record. A camera can be controlled by
time and/or events. See Inputs and Outputs, on page 39 for more
information on sensors and events. A yellow bar indicates that the camera
will be active for events (On Event), and a purple bar that the camera is
active during the entire configured time period (Always).