Filter
Top Products
154 Additional Information
Back up recordings regularly
- This message may appear when you turn on the camcorder. In the event of a malfunction,
recordings may be lost so back up your recordings regularly.
Buffer overflow. Recording was stopped.
- The data transfer rate was too high for the memory card in use and the recording was
stopped. Replace the memory card with one rated Speed Class 2, 4, 6 or 10.
/ Built-in memory error
- The built-in memory could not be read. Contact a Canon Service Center.
/ Built-in memory is full
- The built-in memory is full ([ End] appears on the screen). Delete some recordings
( 53, 90) to free some space. Save your recordings ( 111) and initialize the built-in
memory ( 38).
/ Cannot access the built-in memory
- There is a problem with the built-in memory. Contact a Canon Service Center.
Cannot convert
- Cannot access the memory card. Check the memory card and make sure it is inserted cor-
rectly.
- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card
( 35).
- There was an error creating the file name. Set [Photo Numbering] to [Reset] and ini-
tialize the memory card ( 38) or delete all the photos ( 90) and all the scenes in the
[For Web (MPEG-2)] and [For DVD (SD-VIDEO)] index screens ( 47).
/ Cannot copy
- The total size of the scenes you selected to copy exceeds the available space on the memory
card. Delete some recordings on the memory card ( 53, 90) or reduce the number of
scenes to copy.
- The memory card already contains the maximum number of scenes (3,999 scenes). Delete
some scenes ( 53) to free some space.
Cannot divide the scene. Initialize only using the camcorder.
- The scene could not be divided because the camcorder’s internal scene management data log
is full. Save your recordings ( 111) and initialize the memory ( 38). Then, write the
video files back to the memory and divide the scene again.
Cannot edit
- Could not move a scene in the playlist. Delete some scenes from the playlist ( 80).
Cannot enter standby mode now
- The camcorder cannot enter standby mode if the remaining battery charge is too low. Charge
or replace the battery pack ( 21).