Filter
Top Products
96 Photos
2 Pause the playback at the point you want to capture.
3Press fully.
IMPORTANT
• When capturing photos on an Eye-Fi card, photos will be uploaded
automatically if you are within the range of a configured network. Always
verify that Eye-Fi cards have been approved in the country/region of
use. See also
Using an Eye-Fi card
( 128).
NOTES
• The data code of the photos will reflect the date and time of recording of
the original scene.
•Photos captured from a scene with a lot of fast movement may be
blurred.
• / Photos will be recorded on the memory selected for
recording photos.
Protecting Photos
You can protect photos from accidental erasure.
Protecting Single Photos
1 In single photo view, open the photo selection screen.
[ Protect] appears on the screen.
2 Select ( ) the photo you want to protect.
3 Press to protect the photo.
appears on the bottom bar and the photo cannot be deleted. Press
again to remove the protection.
4 Repeat steps 2-3 to protect additional photos or press
twice to close the menu.
PHOTO
Operating modes:
[ Protect]
FUNC.
FUNC.