Filter
Top Products
Video 41
•Be sure to save your recordings regularly ( 111), especially after mak-
ing important recordings. Canon shall not be liable for any loss or cor-
ruption of data.
NOTES
• About the Power Save mode: If [Power Saving Mode] is set to
[ On], the camcorder will shut off automatically to save power when
it is powered by a battery pack and is left without any operation for 5
minutes. Press to turn on the camcorder.
• When recording in bright places, it may be difficult to use the LCD
screen. In such cases, you can turn on the LCD backlight ( 26) or
adjust the brightness of the LCD screen with the [LCD Bright-
ness] setting.
Selecting the Video Quality (Recording Mode)
The camcorder offers 4 recording modes. Changing the recording
mode will change the recording time available on the memory. Select
FXP or XP+ mode for better movie quality; select LP mode for longer
recording times. The following table gives approximate recording
times.
NOTES
•The camcorder uses a variable bit rate (VBR) to encode video so the
actual recording times will vary depending on the content of the s cenes.
•The camcorder retains the last setting used even if you set the cam-
corder to mode.
POWER
Operating modes:
[ Standard Play 7 Mbps] Desired recording
mode
FUNC.
FUNC.