Canon HF R10 A Camcorder User Manual


 
158 Additional Information
Memory card is write-protected
- The LOCK switch on the memory card is set to prevent accidental erasure. Change the posi-
tion of the LOCK switch ( 165).
Need to recover files from the memory card. Change the position of the LOCK switch on the
memory card.
- This message will appear the next time you turn on the camcorder if power supply was acci-
dentally interrupted while the camcorder was writing on the memory card and later the posi-
tion of the card’s LOCK switch was changed to prevent erasure. Change the position of the
LOCK switch.
No memory card
- Insert a compatible memory card into the camcorder ( 35).
No photos
- There are no photos to play back. Have fun taking some photos ( 86).
No scenes
- There are no scenes in the index screen selected. Have fun shooting some movies ( 40).
- After selecting [Scene Search]
[Scenes with Faces], no scenes contain people’s faces or
no scenes were recorded using the face detection function.
-
/ This message will appear when there are no high-definition scenes on the
memory card. If you converted scenes into standard definition, you can still open the other
index screens to check those scenes ( 47).
Not enough available space
- Delete some recordings on the memory card ( 53, 90) or select the [3 Mbps] bit rate for
the conversion to SD.
Number of scenes already at maximum
- The maximum number of scenes (3,999 scenes) has been reached. Delete some scenes
( 53) to free some space.
Playlist is full. Cannot divide the scene.
- Scenes cannot be divided when the playlist already contains 999 scenes. Delete some scenes
from the playlist ( 80).
Print order error
- You attempted to set more than 998 photos in the print order. Reduce the number of print
orders.
Scene recorded using another device. Cannot divide the scene.
- Scenes recorded using another device cannot be divided with this camcorder.
/ Select the built-in memory as the recording media for movies
- You attempted to set relay recording while the memory card is selected as the recording
media for movies. Change [Rec Media for Movies] to [Built-in Mem.].