Filter
Top Products
Video 69
NOTES
• When the audio level meter reaches the red point (0 dB mark), the
sound may be distorted.
• If the audio level is too high and the sound gets distorted, activate the
microphone attenuator with the [Microphone Attenuator] setting.
• We recommend using headphones to check the sound level while
adjusting the audio recording level or when the microphone attenuator
is activated.
Using Headphones
Use headphones for playback or to check the audio level while record-
ing. The headphones are connected to the AV OUT/ terminal, which
is used for both the headphones and the audio/video output. Before
connecting the headphones, follow the procedure below to change the
function of the terminal from AV output to (headphones) output.
* Headphones can be used also in mode but the function of the terminal can-
not be changed. Change the setting in advance in mode.
appears.
To adjust the volume of the headphones
In mode, adjust ( ) the volume of the headphones with the
[Headphone Volume] setting.
Operating modes:
*
[ Menu] [AV/Headphones]
[ Headphones]
FUNC.
FUNC.