Filter
Top Products
Video 67
• Faders cannot be used when recording video snapshot scenes or when
pre-recording is activated.
On-Screen Displays and Data Code
You can turn most on-screen displays on or off.
Repeatedly press to turn the on-screen displays on/off in the
following sequence:
mode:
• All displays on
•Most displays off*
mode:
• All displays on
• Data code only
• All displays off
mode:
• All displays on
•Regular displays only (removes the histogram and information icons)
• All displays off
*Pressing will turn off most of the icons and displays that appears automati-
cally but will not remove onscreen displays that were turned on manually (for
example, onscreen markers, the audio level meter or the joystick guide).
Operating modes:
About the Data Code
With every scene or photo recorded, the camcorder keeps a data code
(date/time of recording, information about the camera setup, etc.). In
mode, this information is displayed on the bottom bar and as
information icons; in mode, you can select the information to be
displayed with the [Data Code] setting.
DISP.
DISP.