Filter
Top Products
[SSL/TLS] HTTP Communication Encryption Settings
4-29
4
Setting Page
7 [Self CA Certificate]
Used for the purpose of testing SSL communications,
but otherwise not normally used.
8 [Backup]
Click [Exec] to perform a backup of the certificates and
private key. This operation can only be performed via
SSL communications.
9 [Restore]
Installs the certificates and private key from backup.
Click [Browse] to select the backup file, then click
[Exec]. This operation can only be performed via SSL
communications, and will take effect after rebooting.
Encrypted Communications
1 [SSL Communications]
Set SSL communications to [Disable] or [Enable]. The
setting will take effect after rebooting.
However, if no certificate is installed, SSL
communications cannot be changed to [Enable].
Note
• It may take 15 minutes or more to generate an SSL key.
• If SSL communications are used, video transmission
performance drops.
• Depending on the type of the certificate being installed on the
camera, a dialog box may not appear indicating whether the
web browser has accepted the certificate and a connection
cannot be made.
In this case, the procedure below to register the CA certificate
in the web browser.