Canon XM2 Camcorder User Manual


 
134
E
Additional
Information
Notes on Using the Batteries
Charging and Recording Times
These times vary — the safest policy is always to have 2 or 3 times as many battery packs as you
think you will need.
•You will get more recording time if you turn the camcorder off between shots, instead of leaving
it in record pause mode.
The charging time varies depending on the charging conditions.
•You can use the battery pack between 0° to 40°C (32° and 104°F), but it works best between
10° to 30°C (50° and 86°F). Operating time will be shorter than usual at low temperatures like a
ski ground. For better operating results, the battery pack can be warmed in your pocket or
someplace and then used.
If the battery pack starts to give you much less operating time than usual (at normal
temperatures), it has reached the end of its life and must be replaced.
Note:
These figures show how long you can view playback with the LCD, after attaching a fully-
charged battery pack. Playback time will be shortened at low temperatures.
Charging TimeBattery Pack
BP-915 1 hr. 25 min.
BP-930
2 hr. 25 min.
BP-945
3 hr. 40 min.
Battery
Pack
BP-915 2 hr. 1 hr. 35 min. 1 hr. 5 min. 55 min.
BP-930
BP-945
4 hr. 40 min.
7 hr.
3 hr. 55 min.
5 hr. 55 min.
2 hr. 35 min.
3 hr. 55 min.
2 hr. 15 min.
3 hr. 25 min.
Max. Recording Time
Using the Viewfinder Using the LCD Screen
Typical Recording Time*
Using the Viewfinder Using the LCD Screen
Playback Time (Using the LCD Screen)Battery Pack
BP-915 1 hr. 45 min.
BP-930
BP-945
4 hr. 15 min.
6 hr. 25 min.
* Typical Recording Time: Approximate times for recording with repeated operations such as
start/stop, zooming and power on/off. The actual time may be shorter.