Filter
Top Products
87
E
Playback
The camcorder has a built-in speaker and a headphone terminal. You can listen to the sound
during playback. Use the speaker or headphones when using the LCD screen for playback, and use
headphones when using the viewfinder. The built-in speaker is monaural; use headphones for
stereo sound.
Adjust the speaker and headphone volume by pulling the SELECT dial up or
down.
• Pull the SELECT dial up to increase the volume, and down to decrease the volume.
• A volume bar appears in the display to indicate the current volume. It disappears in 4 seconds.
• You can turn off the volume completely by pulling the SELECT dial down until OFF appears.
• You can also adjust the headphone volume separately from the built-in speaker.
• The levels you adjust for the built-in speaker and headphones are memorized separately. The
camcorder retains the levels even if you slide the POWER switch to OFF.
Notes:
• The speaker turns off when you use headphones.
• Sometimes audio may sound distorted when the volume is turned up high. If this happens, turn
down the volume.
Built-in Speaker and Headphone Terminal
Built-in Speaker