Canon XM2 Camcorder User Manual


 
152
E
Additional
Information
You attempted to copy a copyright protected tape. May also
be displayed when an anomalous signal is sent during Analog
Line-in recording ( 98, 99).
Memory Card Caution Phrases
Memory card not inserted into the camcorder ( 113).
The SD Memory Card is set for erasure prevention. Replace the
card or change the position of the protect switch ( 112).
No title image is recorded on the memory card.
No images are recorded on the memory card ( 116).
A memory card error occurred. The camcorder cannot
record/play back. The error may be temporary. If CARD ERROR
disappears after 4 seconds and flashes red, turn the
camcorder’s power off, remove the card and reinsert the card.
If changes to green, you can continue recording/playback
( 116, 118).
No free space remaining on the memory card. Replace with
another memory card or erase images ( 125).
File or folder numbers have already reached the maximum
value ( 115).
The image is recorded in a JPEG format or any format that is
not compatible with the camcorder, or the image contains
corrupted data.
The marked file cannot be edited ( 123).
Appears when you press the start/stop button in CARD
CAMERA mode to inform you that no image has been
recorded.
The cover of the memory card compartment is open.
COPYRIGHT PROTECTED
DUBBING RESTRICTED
NO CARD
THE CARD IS SET FOR
ERASURE PREVENTION
NO IMAGES
NO TITLES
CARD ERROR
CARD FULL
NAMING ERROR
UNIDENTIFIABLE IMAGE
PRINT MARK ERROR
IN CARD POSITION
MEMORY CARD COVER
IS OPEN