Filter
Top Products
136
E
Additional
Information
Installing the Backup Battery
Open the backup battery cover and insert the
CR2025 lithium battery with the + side facing
outwards. Click the cover back into place.
This backup battery allows the camcorder to retain
the date and time and other settings when the
main power source is removed. It has a life span of
about a year.
When it needs replacing (or if it has not been
installed), the y mark flashes in the display.
Remove the old battery by pushing it up, releasing
and lifting it out. Make sure to attach a power
source to the camcorder first, so it will retain your
chosen settings when you change the battery.
DANGER!
Treat the battery pack with care.
• Keep it away from fire (or it might explode).
• Do not expose the battery pack to temperatures greater than 140°F (60°C).
Do not leave it near a heater, or inside a car in hot weather, for example.
• Do not try to disassemble or modify it.
• Do not drop or knock it.
• Do not get it wet.
WARNING!
• The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not
recharge, disassemble, heat above 100°C (212°F) or incinerate.
• Replace the battery with a CR2025 made by Panasonic, Hitachi Maxell, Sony, Sanyo, or with
Duracell DL2025. Use of other batteries may present a risk of fire or explosion.
• The used battery should be returned to the supplier for safe disposal.
Cautions:
• Do not pick up the battery using tweezers or other metal tools — this will cause a short circuit.
•Wipe the battery with a clean, dry cloth to ensure proper contact.
• Keep the battery pack out of reach of children — if it is swallowed, contact a physician
immediately, as the battery case may break down and the battery fluids damage the stomach and
intestines.
• Do not disassemble, heat or immerse the battery in water, to avoid the risk of explosion.