Filter
Top Products
37
E
Recording
The camcorder’s short operation confirmation beeps are indicated by ` in the illustrations. Beeps
sound upon certain camcorder operations such as when you turn the camcorder on, during the
self-timer countdown, right before the camcorder’s automatic shut-off, and also upon any unusual
condition of the camcorder. Beeps are not recorded on the tape.
To turn the beep off, open the menu and select SYSTEM. Then select BEEP, set it
to OFF and close the menu.
You can see a demonstration of the camcorder’s main features. To see the demonstration, do either
of the following:
• With no cassette or memory card inserted, turn the DEMO MODE on in the CAM.MENU or
C.CAM.MENU and close the menu.
• Leave the camcorder with no cassette or memory card inserted for five minutes after turning it
on.
To turn the demonstration mode off, open the menu and select DISP. SET UP. Then
select DEMO MODE, set it to OFF and close the menu.
Notes:
• The opening animation will not appear when the demonstration mode is turned off.
• To cancel the demo mode once it has begun: push any button, turn off the power, load a
cassette or insert a memory card.
BEEP••• ONSYSTEM
( 18)
DEMO MODE••• ONDISP. SET UP
( 18)
+
,
+
,
+
,
+
PLAY
(VCR)
CARD
CAMERA
CARD
PLAY
(VCR)
TAPE
CAMERA
TAPE
+
,
+
CAMERA
CARD
CAMERA
TAPE
Confirmation/Warning beeps
Demonstration Mode