Canon XM2 Camcorder User Manual


 
66
E
Recording
For SLR-style flash photography, attach a Canon Speedlite 220EX, 420EX or 550EX to the
camcorder’s accessory shoe.
Refer also to the Speedlite instruction manual.
Turn the camcorder’s power off before
attaching/detaching the Speedlite.
Slide the Speedlite onto the accessory shoe and tighten
the shoe lock.
Attaching the Speedlite
Operating the Speedlite
1. Turn the power of the Speedlite on.
•Wait for the Speedlite to charge.
While the Speedlite is charging, a white S flashes in the display.
When the Speedlite is fully charged a green S lights up constantly in the display.
Replace the battery of the Speedlite if the white S continues to flash.
2. Press the PHOTO button to record the still image.
Make sure that the Speedlite is charged before recording the still image. Although it is
possible to record while the Speedlite is still charging, the flash will not operate. The Speedlite
cannot charge while you are holding the PHOTO button halfway down.
S disappears from the display while the camcorder records the still picture.
If the S mark does not appear in the display when you turn the Speedlite on, make sure that
the Speedlite unit is slid fully onto the accessory shoe.
Notes:
•Turn the Speedlite unit off when you do not require a flash.
•You cannot use the Speedlite in following cases:
- In the MANUAL recording program.
- When exposure is locked (S turns off if you press the EXPOSURE dial in. It reappears when you
turn the lock off by pressing the EXPOSURE dial in again.)
In the shutter-priority (Tv) mode, you can choose any shutter speed between 1/50 and 1/1000
and clear scan (card: between 1/50 and 1/500).
•Off-Camera Shoe and Connecting Cord for EOS models cannot be used with the XM2.
The bounce flash on the 420EX and 550EX Speedlites cannot be used with the XM2.
The 420EX/550EX’s multiple Speedlite control and the Speedlite Transmitter ST-E2 cannot be used
with the XM2.
In dark recording situations, during autofocus, a assist light may be sent out by the Speedlite to
illuminate the subject while you hold the camcorder’s PHOTO button halfway down.
Using a Canon Speedlite for Flash Photography (Optional)