Filter
Top Products
3-41
Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide
OL-22669-02
Chapter 3 Operation
Events Tab
Step 4 Select Open/Close Relay in the Type drop-down menu.
Step 5 Move the On Time slider to set the amount of time that the relay will remain open. The time range is 0.1
to 200 seconds; the default setting is 0.1.
Step 6 Move the Off Time slider to set the amount of time that the relay will remain closed. The time range is
0.1 to 200 seconds; the default setting is 0.1.
Step 7 Click in the Pulse Count box and type a number.
Step 8 If you do not want the handler activated every time an event occurs, set filters for the handler.
a. Select the day(s) of the week on which you want the relay opened/closed.
b. Type times in the Start and End boxes for the days you have selected. Use time values in 24-hour
notation (for example, use 0800 for 8:00 a.m., 1600 for 4:00 p.m.).
Step 9 Select one or more event sources to open/close the relay when those event sources are activated.
Step 10 Click the Submit button to save the settings, or click the Reset button to clear all of the information you
entered without saving it.
Refer to the following sections for more information:
• Example Handler Filter Setup, page 3-42
Editing an Event Handler
Step 1 Place your mouse pointer over the Events tab.
Step 2 Select Handlers from the drop-down menu.
Step 3 Click the handler profile that you want to delete from the defined handler box located on the left side of
the page.
Step 4 Make any necessary changes to the available fields.
Step 5 Click the Submit button to save the settings, or click the Reset button to clear all of the information you
entered without saving it.
Deleting an Event Handler
Step 1 Place your mouse pointer over the Events tab.
Step 2 Select Handlers from the drop-down menu.
Step 3 Click the handler profile that you want to delete from the defined handler box located on the left side of
the page.
Step 4 Click the Delete Handler button. A dialog box appears with the message “Are you sure you want to
delete the handler?”
Step 5 Click OK. The handler profile is deleted from the defined handler box.