Filter
Top Products
Internally Mounted Interface Cards
Before you can install these you need to take off the upper half of
the printer case to get to the main circuit board.
WARNING
High voltages are present inside the printer when the power is
switched ON. Do not remove the case and install optional
interfaces unless the printer is switched OFF and the AC
power cord is unplugged from its outlet. Also, beware of
touching contacts on the circuit board of the printer - many
of the components are sensitive to static electricity and can be
destroyed by the charge that may build up on your body.
Removing and replacing the printer case
1.
Turn OFF the power to both the printer and the computer, and
disconnect the interface cable from the printer.
2. Remove the dust cover. Take off the paper feed knob on the right
side by pulling it straight out from the printer.
3. Remove the ribbon cartridge.
G-2