Epson LQ 800/1000 Photo Scanner User Manual


 
Basic Widths
The first programs print characters in the LQ’s three basic widths.
Further programs show you how to produce other character widths
by condensing and widening the basic ones.
Pica printing
The first program prints a sample line of characters in pica. This is
the
default
width on the LQ, which means it is used unless the printer
receives a command to use one of the other two basic widths.
40
FOR X=65 TO 105
50 LPRINT CHR$(X);
60 NEXT X: LPRINT: LPRINT
Now run the program to print the results you see below-10 char-
acters per inch:
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghi
Elite printing
To print the same line of characters in elite (which is
12
characters
per inch) add the following line to your program. (Just type the new
line; you don’t have to retype the other lines.)
20 LPRINT CHR$(27)"M";
Now run the program to produce
a
sample of elite printing.
ABCDEFGHIJKLMNOPQRSTUVWXYZ
[\]^_'abcdefghi
Fifteen mode printing
To print the same characters in the fifteen mode (which is
15
charac-
ters per inch) enter this new line 20.
20 LPRINT CHR$(27)"g";
5-5