Filter
Top Products
setdate(8)
128 XSCF Reference Manual • Last Revised January 2007
■ The ntpdate(1M) command is executed in the domain.
■ Rebooting the domain
■ The setdate(8) command needs to be executed in the system power-off status.
■ In case an NTP server set to XSCF, the time set by the setdate(8) command
becomes invalid. Whether an NTP server set to XSCF or not can be checked by
using the showntp(8) command.
■ To check the currently set XSCF date and time, execute the showdate(8)
command.
EXAMPLES
EXAMPLE 1 Sets "January 27 16:59:00 2006" of the local time (JST) as the current time.
EXAMPLE 2 Sets "January 27 07:59:00 2006" of UTC as the current time.
EXAMPLE 3 Sets "January 27 16:59:00 2006" of the local time (JST) as the current time.
Automatically replies with 'y' to the prompt.
XSCF> setdate -s 012716592006.00
Fri Jan 27 16:59:00 JST 2006
The XSCF will be reset. Continue? [y|n] :y
Broadcast message from root (pts/4) (Jan 27 07:59:10 2006):
The system is going down for reboot NOW!
The reset continues after this point.
XSCF>
setdate -u -s 012707592006.00
Fri Jan 27 07:59:00 UTC 2006
The XSCF will be reset. Continue? [y|n] :y
Broadcast message from root (pts/4) (Jan 27 07:59:10 2006):
The system is going down for reboot NOW!
The reset continues after this point.
XSCF> setdate -y -s 012716592006.00
Fri Jan 27 16:59:00 JST 2006
The XSCF will be reset. Continue? [y|n] :y
Broadcast message from root (pts/4) (Fri Jan 27 16:59:10 2006):
The system is going down for reboot NOW!
The reset continues after this point.