Filter
Top Products
showroute(8)
System Administration 341
NAME showroute - display routing information for an XSCF network interface
SYNOPSIS showroute [-M][-n] -a | interface
showroute -h
DESCRIPTION showroute(8) command displays the current routing information for an XSCF
network interface.
Routing information for the specified network interface or all the network interfaces
can be displayed. The following information is displayed:
Privileges You must have one of the following privileges to run this command:
useradm, platadm, platop, auditadm, auditop, domainadm, domainmgr,
domainop, fieldeng
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
Destination Destination IP address
Gateway Gateway address
Netmask Netmask address
Flags Flag
Interface XSCF network interface name
-a Displays routing information that is set for all XSCF network
interfaces.
-h Displays usage statement. When used with other options or
operands, an error occurs.
-M Displays text by page. This option provides a function that is
the same as that of the more command.
-n Displays IP address without the name resolution of host name.