Filter
Top Products
cfgdevice(8)
System Administration 25
EXAMPLE 4 Displays the status of individual DVD/TAPE drives set (without the expan-
sion cabinet).
EXAMPLE 5 Displays the status of individual DVD/TAPE drives set (with the expansion
cabinet).
EXAMPLE 6 Connects a DVD/TAPE drive to port 0-0 when the system is being powered
on. Automatically answers "y" to all prompts.
EXAMPLE 7 Connects a DVD/TAPE drive to port 0-0 when the system is being powered
on. Automatically answers "y" to all prompts without displaying messages.
EXIT STATUS The following exit values are returned:
XSCF> cfgdevice -l
Current connection for DVD/DAT: port 0-0
Expander status
Port No. IOU/SAS-status SAS-status
-----------------------------------
0-0 enable up enable up
0-2 disable up enable up
XSCF>
cfgdevice -l
Current connection for DVD/DAT: port 0-0
Expander status
Port No. IOU/SAS-status SAS-status
-----------------------------------
0-0 enable up enable up
0-2 disable up enable up
0-4 disable up enable up
0-6 disable up enable up
1-0 disable up enable up
1-2 disable up enable up
1-4 disable up enable up
1-6 disable up enable up
2-0 disable up enable up
2-2 disable up enable up
2-4 disable up enable up
2-6 disable up enable up
8-0 enable up enable up
8-2 disable up enable up
8-4 disable up enable up
8-6 disable up enable up
XSCF>
cfgdevice -y -c attach -p 0-0
Are you sure you want to attach the device [y|n] :y
Completed.
XSCF> cfgdevice -q -y -c attach -p 0-0
0 Successful completion.
>0 An error occurred.