Filter
Top Products
showdomainmode(8)
272 XSCF Reference Manual • Last Revised January 2007
EXTENDED
DESCRIPTION
■ If the Mode switch on the operator panel is set to"Service", the settings have
the following values regardless of the domain mode displayed by the
showdomainmode(8) command:
■ Diagnostics Level: operates as the showdomainmode(8) command
display
■ Secure Mode: off
■ Autoboot: off
■ The setdomainmode(8) command sets a domain mode.
EXAMPLES
EXAMPLE 1 Displays the current state of the operation mode for domain ID 0.
EXIT STATUS The following exit values are returned:
SEE ALSO setdomainmode(8)
XSCF> showdomainmode -d 0
Host-ID :0f010f10
Diagnostic Level :min
Secure Mode :on
Autoboot :on
0 Successful completion.
>0 An error occurred.