Filter
Top Products
applynetwork(8)
System Administration 17
NAME applynetwork - reset XSCF to reflect information that has been set for the XSCF
network
SYNOPSIS applynetwork [[-q] -{y|n}][-M]
applynetwork -h
DESCRIPTION applynetwork(8) resets XSCF to reflect network information that has been set for
an XSCF unit.
When setting one of the following, XSCF should be reset to reflect network
information using the applynetwork(8) command.
■ XSCF host name
■ DNS servers
■ DNS domain name
■ IP address
■ netmask
■ routing
Host name, DNS domain name, name server, IP address, net mask, and routing
setting information is displayed when resetting. In case the active XSCF is normal
and the standby XSCF is abnormal, resets the active XSCF only.
Note – If XSCF is reset without using the applynetwork(8) command, network
information that is set is not reflected in XSCF. Also, information that is set is
deleted.
Privileges You must have platadm privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
OPERANDS There are no operands.
-h Displays usage statement. When used with other options or
operands, an error occurs.
-M Displays text by page. This option provides a function that is
the same as that of the more command.
-n Automatically answers 'n' (no) to all prompts.
-q Suppresses all messages to stdout, including prompts.
-y Automatically answers 'y' (yes) to all prompts.