Filter
Top Products
cfgdevice(8)
24 XSCF Reference Manual • Last Revised January 2007
■ A DVD/TAPE drive is mounted in each of the base and expansion cabinets in a
high-end server that has the expansion cabinet. In such cases, each DVD/TAPE
drive can be connected only to a domain within the cabinet in which the drive is
mounted. Settings for connection must be made for both the base cabinet and
expansion cabinet.
EXAMPLES
EXAMPLE 1 When the system is being powered off, reserves the connection of a DVD/
TAPE drive to the port 0-0.
EXAMPLE 2 When the system is being powered on, connects a DVD/TAPE drive to port
0-0.
EXAMPLE 3 Disconnects the DVD/TAPE drive from the port 0-0.
XSCF> cfgdevice -l
Current connection for DVD/DAT:
Main chassis: port 0-0
Expansion chassis: port 8-0
Expander status
Port No. IOU/SAS-status SAS-status
-----------------------------------
0-0 enable up enable up
0-2 disable up enable up
0-4 disable up enable up
0-6 disable up enable up
1-0 disable up enable up
1-2 disable up enable up
1-4 disable up enable up
1-6 disable up enable up
2-0 disable up enable up
2-2 disable up enable up
2-4 disable up enable up
2-6 disable up enable up
8-0 enable up enable up
8-2 disable up enable up
8-4 disable up enable up
8-6 disable up enable up
XSCF>
cfgdevice -c attach -p 0-0
Are you sure you want to attach the device [y|n] :y
Completed.( Reservation )
XSCF> cfgdevice -c attach -p 0-0
Are you sure you want to attach the device [y|n] :y
Completed.
XSCF> cfgdevice -f -c detach -p 0-0
Are you sure you want to detach the device [y|n] :y
Completed.