Filter
Top Products
121
Using the Setup Menu
TV Configuration
This setting allows you to set the video signal format for
displaying camera images on a television (TV) that is
connected to the camera with an HP Photosmart
R-series camera dock. For information on connecting the
camera to a TV, see the dock User’s Manual.
The default TV Configuration setting depends on the
language and region you selected when you turned on the
camera for the first time.
1. In the Setup Menu (see page 113), select TV
Configuration.
2. Use the buttons to highlight
one of these two choices:
• NTSC—Used primarily in
North America, parts of South
America, Japan, Korea, and
Taiwan
• PAL—Used primarily in
Europe, Uruguay, Paraguay, Argentina, and parts of
Asia
TIP: If the current setting does not work where you live, try
the other setting.
3. Press to save the setting and return to the Setup
Menu.
The new setting remains in effect until it is changed again,
even when you turn the camera off.
NOTE: When viewing images on a TV, the rate at which
images are displayed can be affected by the speed of a
memory card, or by the quantity and size of images or
video clips being viewed.