Filter
Top Products
81
Taking Pictures and Recording Video Clips
Date & Time Imprint
This setting imprints either the date or the date and time the
image was captured. The Date & Time Imprint setting:
• Affects only images taken after you have set it.
• Is permanent. You cannot remove it from an image.
• Rotates with the image (see page 88).
TIP: Verify that the date and time setting is correct before
using this feature (see page 119).
1. In the Capture Menu (see
page 62), select Date & Time
Imprint.
2. Use the buttons to highlight
a setting.
3. Press to save the setting.
If the new setting is anything other than the default, the icon
for the setting appears in the Live View screen.
The Date & Time Imprint setting remains in effect until it is
changed again, even when you turn the camera off.
NOTE: The Date & Time Imprint setting does not apply when
recording video clips, nor in the Panorama modes.
Setting Description
Off (Default) No date or time imprinted on the image.
Date Only
Date permanently imprinted in the lower left corner
of the image.
Date & Time
Date and time permanently imprinted in the lower
left corner of the image.