Filter
Top Products
17
Getting Started
8. Set the Date and Time
The camera has a clock that records the date and time at
which you take each picture. You can also choose to have
the date and time imprinted on the image (see page 81).
1. The first item highlighted is the
date and time format. If you want
to change the format, use the
buttons. If the date and time format
is correct, press to move to the
Date.
2. Adjust the value of the highlighted
selection using the buttons.
3. Use the buttons to move to the other selections.
4. Repeat Steps 2 and 3 until the date and time are set
correctly.
5. Press when you have entered the proper values for
the date and time. A confirmation screen appears,
asking if the correct date and time have been set. If the
date and time are correct, press
to select Yes.
If the date and time are incorrect, press to highlight
No, then press . Repeat steps 1 through 5 to set the
correct date and time.
Date and time information is recorded in the image
properties, which you can see in Playback when the
Playback Menu (see page 88) or HP Instant Share Menu
(see page 104) is displayed, when viewing Image Info (see
page 92) and when viewing the image on your computer.
TIP: If you need to change the date and time settings later,
you can do this with the Date & Time setting in the Setup
Menu (see page 119).