Filter
Top Products
SurePOS 100 Technical Reference
Page 101 of 104
The data ID character is represented by a sequence of keycodes that mimics the depression of keys on a PC
keyboard that generate an equivalent binary value to applications that read ASCII keyboard characters
(ALT+numeric pad characters). The data id character can be explicitly specified to be any value between 00h and
Ffh
From menu ‘System->Configure Prefix and Keyboard’ to enter Prefix/Suffix and Keyboard mode Configuration
Panel.
To Configure Internal Keyboard Prefix/Suffix from the Internal Configuration Panel.
To Configure MSR Prefix/Suffix from the MSR Configuration Panel.
To Configure External Device Prefix/Suffix from the External Configuration Panel.
To select active keyboard from the Active Keyboard Mode Selection Panel.
Press Apply button to let setting take effect.
Double Key Setup
Connect external keyboard to IBM SurePOS100 Keyboard by PS/2 or USB and open IBM SurePOS100 Keyboard
Configuration Utility (AP).
Press the Double Key Setup Hot Key of the above picture or from menu ‘System->Set Doubled Keys’ to enter
double key setup panel. The original double key setup panel is as PIC_02.
Drag a function Key of the above picture (make horizontal double key, make vertical double key, make quaternary
double key, remove horizontal double key, remove vertical double key, remove quaternary double key) to a group
of PF Keys and drop to define a double key or remove a double key. PIC_03 is an example of double key setup.
We use the same PX to indicate all PX are in the same group PF keys.
Press the PF Key Programming Hot Key of the above picture or from menu ‘System->Configure PF Keys’ to enter
PF Key Programming setup panel and check the setup results.