Filter
Top Products
SurePOS 100 Technical Reference
Page 74 of 104
"K" n1 Normal density graphics Yes Yes
"L" n1n2 High density graphics Yes Yes
"k" n1 d1 Fine density graphics No Yes
"X" n1 n2
m1
Fine density graphics No Yes
"^"
n0n1n2
9-dot bit image Yes No
"&" n1 n2 Define a download character No Yes
"&" Define download character No Yes
"&" Delete a download character No Yes
"%" "1" or
"%"
Enable download character set Yes Yes
"%" "0" or
"%"
Disable download character set Yes Yes
"@" Initialize printer Yes Yes
"?" Reset printer hardware Yes Yes
Enquiry Yes Yes
Cancel print data in buffer Yes Yes
"U" "1" or
"U"
Select unidirectional print mode Yes Ignored
"U" "0" or
"U"
Select bidirectional print mode Yes Ignored
Enter STX-ETX mode Yes No
Terminate STX-ETX mode Yes No
n1n2 Adjust drive pulse width for cash drawer Yes Yes
Deferred drive command for cash drawer Yes Yes
Immediate drive command for cash drawer Yes Yes
data Select validation printing No No
Beep the buzzer No Yes
"#*" Request to send firmware version No Yes
"#n =
0000"
Request to send memory switch setting No Yes
"#N, n1
n2 n3 n4"
Set memory switch No Yes
"d" "0" or
"d"
Full-cut command to the auto cutter No Yes
"d" "1" or
"d"
Partial-cut command to the auto cutter No Yes
"b" n1 n2
n3 n4 d1
...
Select bar code printing No Yes
9.6.2 DBCS Character Commands -- Simplified and Traditional Chinese Versions