IBM 4613 Film Camera User Manual


 
SurePOS 100 Technical Reference
Page 64 of 104
Density Table
3-19
3-19
n1 D
n1 C
n2 B
n2 A
n2 9
n2 8
n3 7
n3 6
n3 5
n3 4 Emulation
Mode
Star ESC/POS Standard and Japanese versions only
n4 3
n4 2
n4 1
n4 0 Handshake DTR XON/XOFF
Table 3-19. Print Density
n1 bit F bit E Print Density Note
C 1 1 Low Level 1
0 0 0 Normal Level 2
8 1 0 Medium High Level 3
4 0 1 High Level 4
Function: Program memory switch into printer RAM, MP512 Only
Code: <ESC><GS> #m N n1n2n3n4 <LF><NUL>
1Bh 1Dh m N n1n2n3n4 0Ah 00h
m=”,”: Define memsw data as “word set”
N: number of memsw
n1n2n3n4: defined data
Outline: The memory switch is a “soft” dip switch to set the printer configuration. After the memory switch
command has been sent the setting can be enabled by issuing the update and enable memory switch settings
command.
Function: Update and enable memory switch settings, MP512 Only
Code: <ESC> <GS> “#W00000” <LF><NUL>
1Bh 1Dh W00000 0Ah 00h
Outline: Writes settings updated by the program memory switch command into the printer’s flash memory,
and resets the printer to enable the new memory switch settings. Multiple memory switch settings can be
programmed for each set memory switch command. This operation should not be performed on a per receipt
basis as it may decrease printer life.
Function:
Vertical Column Alignment