Filter
Top Products
SurePOS 100 Technical Reference
Page 103 of 104
To let the PF Key function work properly, you should set the keyboard mode to pos mode from menu ‘System-
>Configure Prefix and Keyboard’.
After you finish the key programming, you can use Download Configuration to save the results to the
SurePOS100 Keyboard. And you can use Upload Configuration to update the Utility Configuration status from the
SurePOS100 Keyboard.
PIC_04
Load Default Keyboard mode
Connect external keyboard to IBM SurePOS100 Keyboard by PS/2 or USB and open IBM SurePOS100 Keyboard
Configuration Utility (AP).
From menu ‘File->Load 10X Keyboard’ to load one default Keyboard mode to PF Key Programming setup panel.
Make some proper modify to it, set active keyboard to pos mode, and store it to SurePOS100 keyboard.
This function can help you to generate PF Keys which are default keyboard mode alike easily.
Configuration File
Connect external keyboard to IBM SurePOS100 Keyboard by PS/2 or USB and open IBM SurePOS100 Keyboard
Configuration Utility (AP).
From menu ‘File->New Configuration File’ to set utility all configuration items to default value.
From menu ‘File->Open Configuration File’ to load a configuration file to keyboard utility.
From menu ‘File->Save Configuration File’ or ‘File->Save Configuration File As’ to save current configuration
results to a SurePOS100 keyboard configuration file(.pcf).