Filter
Top Products
SurePOS 100 Technical Reference
Page 29 of 104
8.3 JAVAPOS Keyboard/MSR Command protocol
1. JPOS Command set prefix
PC SurePOS100
E7h, C6h, 08h, PB
ACK
Note:
PB: Prefix Byte, 00-FF
2. JPOS Command set suffix
PC SurePOS100
E7h, C6h, 09h, SB
ACK
Note:
SB: Suffix Byte, 00-FF
3. JPOS Command set prefix and suffix Enable/Disable
PC SurePOS100
E7h, C6h, 0Ah, PSB
ACK
Note:
PSB: Prefix and Suffix Enable/Disable Byte, Bit0: prefix, Bit1: suffix, Range: 00-03
00: Prefix and Suffix all Disable.
01: Prefix Enable, Suffix Disable
02: Prefix Disable, Suffix Enable
03: Prefix and Suffix all Enable
4. JPOS Command Write Flash Command
PC SurePOS100
Enable: E7h, C6h, 0Bh, 01h
ACK
5. JPOS Command Query MSR Track Status
PC SurePOS100
Enable: E7h, C6h, 0Ch, 01h
RESPONSE
Note:
RESPONSE:
0x0B 0x8B: ‘0’ scan code (make and release), All Track Disable
0x02 0x82: ‘1’ scan code (make and release), Track1 Enable, Track2, 3 Disable
0x03 0x83: ‘2’ scan code (make and release), Track1 Disable, Track2 Enable, Track3 Disable
0x04 0x84: ‘3’ scan code (make and release), Track1 Enable, Track2 Enable, Track3 Disable
0x05 0x85: ‘4’ scan code (make and release), Track1 Disable, Track2 Disable, Track3 Enable
0x06 0x86: ‘5’ scan code (make and release), Track1 Enable, Track2 Disable, Track3 Enable
0x07 0x87: ‘6’ scan code (make and release), Track1 Disable, Track2 Enable, Track3 Enable
0x08 0x88: ‘7’ scan code (make and release), All Track Enable