Filter
Top Products
3
General Information
34
1. Lamp Illuminance Key: When this key is pressed together with the Shift
Key, the illumination of the screen is adjusted.
When this key is continuously pressed, the screen
is gradually darkened until it is turned OFF. When
any key is pressed then, the illumination returns to
the maximum level.
2. Resolution Key: When this key is pressed together with the Shift
Key, the resolution of the Scanner is set.
When the Scanner is connected to the Printer: 4H
and 6H
When the Scanner is connected to the PC: 2H, 3H,
4H, 6H and 8H
* 4H represents 400dpi and 6H represents 600dpi.
3. Job Recall Key: When this key is pressed together with the Shift
Key, the program registration locations (1J, 2J and
3J) are called. Each time this key is pressed while
the Shift Key is held down, the display is switched
in order of 1J
→
2J
→
3J.
4. Zoom Key: When this key is pressed together with the Shift
Key, the electrical zoom magnification is set.
Zoom+: When this key is pressed together with
the Shift Key, the magnification is
increased by an increment of 0.01X
(up to 2.00X).
Zoom clr: When this key is held down together
with the Shift Key for one second, the
standard magnification is resumed.
Zoom-: When this key is pressed together with
the Shift Key, the magnification is
decreased by a decrement of 0.01X
(down to 0.50X).
5. Shift Key: Executes an expansion function when being
pressed together with the intended function key.
6. PC/PR Key: When this key is pressed together with the Shift
Key, the connection to the PC or to the Printer is
selected.
*This key is not valid unless the PC interface kit
(optional) is installed.