Filter
Top Products
4
Mechanical and Electrical
58
4.9.3 Identification Marks
In order to distinguish which scanner sent a print job, the scanners are
equipped with an identification Mark Printing Function which has the
following settings:
The printable area is reduced by 3 mm on the left side and the 1.5-mm-
wide identification mark is printed in the top corner of the page at a
distance of 1.5 mm to the left of the image.
Function Mode Setting Identification Mark
S7 d0
d1
d2
no mark
S7-d1: Prints pattern 1 (
!
)
S7-d2: Prints pattern 2 (
!!
)
Print Direction
Printed Image
Identification Mark