Filter
Top Products
Mechanical and Electrical
4
57
4.9 2 to 1 Printing Function
4.9.1 Overview
As shown above, two scanners, each equipped with the 2-to-1 Printing
Function, can be connected to a single printer which manages the print
jobs sent from both scanners.
Each scanner can be set to print marks (■ or ■■) in the top left-hand
corner of the page, enabling easy identification of each scanner’s print job.
4.9.2 Operation
When printing, the scanner occupies the printer. When the print is ended,
the scanner opens the printer.
The scanning begins when the start key to the other scanner is pushed.
And waited that the printer is opened while storing the image in the
memory in the scanner while printing.
Meanwhile, scanner is shown for the Multi-print display to blink, and not to
accept the next scanning.
If the print of the preceding other scanner ends, and the printer is opened,
the image stored in the memory as here occupies the printer is printed.
A job that is waiting to be printed can be cancelled by pressing the Clear/
Stop key on the scanner that sent the job.
(Push the Clear/Stop Key three times when you used the print reserve
function)
As a result, the print job is deleted from the memory and that scanner's
Multi-print Display stops blinking and stays lit.
Scanner
Printer