Filter
Top Products
Safety Precautions for Inspection and Service
1
1
1 Safety Precautions for Inspection and
Service
When performing inspection and service procedures, observe the
following precautions to prevent accidents and ensure utmost safety.
*Depending on the model, some of the precautions given in the following
do not apply.
Different markings are used to denote specific meanings as detailed
below.
Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate
injury. It may also be used to alert against unsafe
practices.
The following graphic symbols are used to give instructions that need to
be observed.
Used to call the service engineer attention to what is graphically
represented inside the marking (including a warning).
Used to prohibit the service engineer from doing what is
graphically represented inside the marking.
Used to instruct the service engineer to do what is graphically
represented inside the marking.
1.1 WARNING
1. Always observe precautions.
WARNING
CAUTION
• Parts requiring special attention in this product will include a
label containing the mark shown on the left plus
precautionary notes. Be sure to observe the precautions.
• Be sure to observe the “Safety Information” given in
Operator’s Manual.