Filter
Top Products
6
Function Mode and Adjustment
88
6.5.11 Sb: Scan Table Stop Position Adjustment (Scan Position)
This adjustment is necessary when any of the following symptoms occurs.
* The stop position of the Scan Table should be set toward the rear for
symptom 1 explained above and toward the screen for symptom 2.
6.5.12 SC: Scan Table Stop Position Adjustment (Reader Position)
This adjustment is necessary when any of the following symptoms occurs.
* The stop position of the Scan Table should be set toward the screen for
symptom 1 explained above and toward the rear for symptom 2.
Symptom 1. Each time a print is made, the image on the Screen shifts vertically.
Symptom 2. The noise becomes big that is heard when the Scan Table hits against
the Scan Table Stopper during its motion from the reader position to
printer position.
Display setting Scan Table Stop Position
Sb d0
|
d8
|
dF
toward the rear
|
center
|
toward the screen
Rear
Screen
Symptom 1. Each time a print is made, the image on the Screen shifts vertically.
Symptom 2. The noise becomes big that is heard when the Scan Table hits against
the Scan Table Stopper during its motion from the reader position to
printer position.
Display setting Scan Table Stop Position
SC d0
|
d8
|
dF
toward the screen
|
center
|
toward the rear
Rear
Screen