Konica Minolta 5D Camcorder User Manual


 
113
ABOUT THE BATTERY CHARGER CORD
The included AC cord is designed for the current of the sales region. Only use the cord
in the region it was purchased.
China (220-240V)
Continental Europe, Korea, Singapore (220-240V)
Great Britain, Hong Kong (220V-240V)
United States, Canada, Japan, Taiwan (100V-120V)
APC-151
APC-150
APC-160
APC-170
Region Product code
The External High-Power Battery Pack Kit EPB-100 is not compatible with this camera.
Accessory Notes
Australia (220-240V)
APC-230
PC FLASH ADAPTER PCT-100
The PC Flash Adapter PCT-100 allows a studio or location flash system to be connected
to the camera with a standard PC cord. The adapter is compatible with both center
positive (normal polarity) and center negative (positive polarity) flash units with a voltage
of 400V or lower. The software upgrade included with the PCT-100 should not be used.
To ensure correct exposures, use the manual exposure mode. Set the shutter speed
equal to or slower than the flash duration; refer to the flash unit’s instruction manual. The
camera’s flash-compensation function has no affect on the flash exposure. To make an
exposure bracket, press and hold the AEL button during the bracketing series to control
the exposure with the aperture rather than the shutter speed.
The use of custom white balance is recommended. When calibrating the camera, use the
shutter speed and aperture settings require for the final exposure. A gray card may have
to be used as the reference target with powerful flash units to reduce the intensity of the
illumination. If custom white balance is not practical, use the preset daylight or flash
setting or set the color temperature to the flash unit’s color temperature if known; auto
white balance is not recommended.