23
BATTERY CONDITION INDICATOR
Full-battery indicator - the battery is fully charged.
Low-battery indicator - battery power is low. Recharge the battery.
AUTO POWER SAVE
To conserve battery power, the camera shuts down if an operation is not made within
three minutes. To restore power, press the shutter-release button partway down. The
length of the auto-power-save period can be changed in section 3 of the setup menu (p.
105).
The LCD monitor backlight turns off after five seconds. Press a camera button to restore
the display. The length of this period can be changed in section 3 of the setup menu (p.
105).
This camera is equipped with an automatic battery-condition
indicator. When the camera is on, the indicator appears on the
monitor. The indicator changes from white to red when battery
power is low. Not all camera functions are available if battery
power is low. If the monitor is blank, the battery may be
exhausted.
Low-battery warning - battery power is very low. Recharge the
battery.
When power falls below the level of the low-battery warning, the battery exhausted
message appears just before the camera shuts down. The camera will not function until
the battery is recharged.