Filter
Top Products
2 QUICK START CHECK LIST
QUICK START CHECK LIST
The following sections will get you started in enjoying
your camera.
Attach a lens (p. 18) and the camera strap (p. 19).
Adjust the viewfinder diopter if necessary (p. 19).
Charge the battery (p. 20) and insert it into the camera
(p. 21).
Insert a memory card into the camera (p. 24). Turn on
the camera and set the date and time (p 26).
To take a picture, see the basic recording operation section on page 28. To use
the flash, see page 31.
To playback recorded images, see page 34.
To delete an image, see page 36.
To connect the camera to a computer to download images, see page 115.
CAUTION: when using a Windows 98 or 98SE operating system, the supplied
driver software must be installed, see page 116. To install Kodak EasyShare
software, see page 132. To install DiMAGE Master Lite, see page 134.
For basic problems, see the troubleshooting section on page 136.