Filter
Top Products
41
AUTO RECORDING
Auto recording is set with the exposure-mode dial. Use this
exposure mode when wanting fully-automatic exposure
control. Auto recording operates like the program exposure
mode, except that when the exposure mode dial is turned to
the auto-recording position, recording functions are reset to
their default settings. Not all function are available in auto
recording such as color mode and Digital Effects Control.
Functions are reset to: fill-flash or red-eye reduction flash mode, multi-segment metering,
Auto AF focus mode, wide AF area, single-frame advance drive mode, flash and
exposure compensation reset, ADI flash control, Auto ISO, large-size images, fine image
quality, AF priority, noise reduction.
PROGRAM - P
Program exposure is set with the exposure-mode dial (p. 39).
Like auto recording, program controls both the shutter speed
and aperture required for each exposure. The operation is the
same as described in the basic recording operation section on
page 28. However, unlike auto recording, functions set in this
mode do not reset when the position of the exposure-mode dial
is changed. The default camera sensitivity for program is ISO
100.
Program shift
Program shift allows adjustment to the shutter-speed/aperture
combination in 1/3 Ev increments without affecting the total
exposure. Using the built-in flash cancels program shift.
Press the shutter-release button partway down until the shutter
speed and aperture are displayed. Turn the control dial (1) to
shift the shutter speed and aperture combination; P
S is
displayed for the exposure mode. Program shift can be
changed between aperture and shutter priority in section 1 of
the custom menu (p. 92, 95).