Filter
Top Products
25
If the “Unable to use card, Format?” message appears, the card should be formatted with
the camera. Use the right/left keys of the controller to highlight the yes button. Press the
central button of the controller to format the card; this can take several minutes
depending on the card. When a card is formatted, all the data on the card is permanently
erased. Selecting “No” cancels the formatting operation; remove the card from the
camera. A memory card used in another camera may have to be formatted before being
used.
If the card-error message appears, press the central button of the controller to close the
window; check the Konica Minolta web site for the latest compatibility information:
North America: http://www.konicaminolta.us/
Europe: http://www.konicaminoltasupport.com
TURNING ON THE CAMERA
Access lamp
Slide the main switch to the on position to turn
on the camera. The access lamp glows briefly
to indicate the power is on.
When not in use, turn the camera off to
conserve power.