Filter
Top Products
77
INSTANT PLAYBACK
After each image is captured, it is displayed as specified by the menu. Press the shutter-
release button partway down to end the instant playback.
During the instant playback period, the captured images can be deleted using the delete
button (p. 36). When a continuous-advance bracketed series is captured, the entire
series is erased. Single non-RAW images can be enlarged with the magnification button.
The image is centered on the AF area used, see page 38 for information on enlarged
playback.
After an image is captured, it can be displayed on the
monitors for two, five, or ten seconds before being saved.
When using continuous-advance bracketing, an index
display is used. Instant playback is activated and the length
of the playback period is set with the instant-playback
option in section 3 of the recording menu (p. 64).
Inst.Playback 2 sec.
Setup Image & info.
Noise reductn On
–Interval
The setup option below instant playback specifies the display format:
Image only Image & information Image & histogram
This function reduces the affect of dark noise with exposures of one second or longer.
Processing is applied to each image after it is captured. The monitor remains blank
during processing for a maximum of 30 seconds. This can be turned off in section 3 of
the recording menu (p. 64). Noise reduction uses dark-frame subtraction. Noise reduction
is not applied to a series of continuous-advance images
NOISE REDUCTION