Filter
Top Products
117
CCD-PLANE INDICATOR
For some technical photographic applications such as
macro photography, the position of the CCD plane is
necessary. The CCD-plane indicator is located next to the
exposure-mode dial.
CCD-plane indicator
LENS COMPATIBILITY
All Konica Minolta AF lenses are compatible with this camera. MD and MC series lenses
cannot be used. For our current line of lenses, contact your Konica Minolta dealer.
The AF Macro Zoom 3X - 1X f/1.7-2.8 cannot be used with Anti-Shake (p. 32); turn Anti-
Shake off. If a lens is equipped with a macro release, the release cannot be used with
Anti-Shake. Focus range limiters set to a range that does not include infinity cannot be
used. The focus range limiter on the SSM-series or D-series macro lenses can be used
at any set range. Anti-Shake may not work with products made by another manufacturer.
To extend the versatility of the camera, an accessory flash unit (sold separately) can be
used. Always remove the accessory flash when the camera is not in use, and replace the
accessory-shoe cap to protect the contacts.
ATTACHING AN ACCESSORY FLASH UNIT
Slide the accessory-shoe cap off as shown.
Mount the flash unit on the accessory shoe
by sliding it forward until it stops.