Filter
Top Products
Using the MENU Command Sequence
27
basis. For example, to enter the # 14, press # 1 followed by # 4 (not # 14).
To enter the # 3, press # 3 followed by the TAKE button
1
.
The memory recalls the setup. The MATRIX Display shows the blinking
setup and the TAKE LED blinks. The STATUS Display shows the
message:
SETUP # xy
Load ?
Where xy are the OUT buttons.
3. Preview the setup to decide whether to implement it. If not, you can scan the
other setups, by pressing different OUT buttons. To stop previewing the
setups, press a non-relevant button, for example, an IN button.
4. Press the TAKE button.
The specific setup is implemented.
If trying to recall an empty setup
2
, the MATRIX Display would show a
message saying that that particular setup is empty and would return you to
step 1 above.
8 Using the MENU Command Sequence
You can press the MENU button up to 11 times in straight sequence to scan
the range of commands.
1 Alternatively, pressing # 10 followed by # 3 will also enter the # 3
2 That is, a setup # for which no setup is actually stored