Filter
Top Products
Using the MENU Command Sequence
39
1. Press the MENU button until you reach the Identifying the MACHINE
command.
The MATRIX Display shows the message:
identify MACHINE
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The MATRIX Display (as Figure 16 illustrates) shows the message:
Figure 16: Machine Identification
8.11 Choosing the Initial RESET
Choose to reset the machine
1
to the:
Current status
2
(reloads the current setup)
Factory default (resets to the pre-installed factory default state
3
)
To reset the machine, do the following:
1. Press the MENU button until you reach the initial RESET command.
The MATRIX Display shows the message:
initial RESET
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The MATRIX Display shows the message:
Outkey 1: Current status
2: Factory default
3. Press the OUT button 2, for example, to reset to the factory default.
The TAKE LED blinks and the Displays show the messages:
Reset to factory default
Press TAKE to execute
WARNING
!!!!!
1 Without having to switch the power off and on
2 Sometimes called a “soft reset”
3 Each VS-1616SDI unit ships in its factory default state that is a 16x16 SDI video matrix, with all setups empty and each
input connected to its corresponding output (for example, 1-to-1)