Filter
Top Products
Using the MENU Command Sequence
33
Connect the RS-485 terminal block connectors
1
between each
switcher in the multi- switcher system
Connect and set the video reference signal on one of the video
units to EXT (external sync) or INT# 1 (internal sync)
Set the video reference on the other video units to the MTX
(SYNC from Matrix) setting
Figure 14: Choosing the MTX (SYNC from Matrix) Setting
8.3.2 Configuring a SWITCHING METHOD
To choose a SWITCHING METHOD setting, do the following:
1. Press the MENU button until you reach the SWITCHING METHOD
setting.
The MATRIX Display shows the message:
SWITCHING METHOD setting
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The Displays show the messages:
Use OUTkey to configure
1: noVIS 2: EXT 3: INT#1 4:MTX
Current
External
2
1 Via a straight connection of all 4 PINS
2 Indicating that the machine is currently set to the external switching method setting