Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the MENU Command Sequence
36
To scroll the switcher setup (instead of showing the IN/OUT range), do the
following:
1. Press the MENU button until you reach the “What to INDICATE”
command.
The MATRIX Display shows the message:
what to INDICATE
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The Displays show the messages:
Use OUTkey to configure
1: scroll SETUP 2: OUTs/INs
Current:
OUTs/INs
3. Press the OUT button 1.
The TAKE LED blinks and the Displays show the messages:
Scroll switcher setup?
Press TAKE to execute
Current:
OUTs/INs
4. Press the TAKE button.
The Displays show the messages:
display mode
changed
Current:
SETUP
8.7 Choosing the COMMUNICATION Setting
Choose the response option (reply or no reply).
To choose the No Reply response option, for example, do the following:
1. Press the MENU button until you reach the COMMUNICATION setting.
The MATRIX Display shows the message:
COMMUNICATION setting
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The MATRIX Display shows the message:
Use OUTkey to configure
1: REPLY 2: No Reply
3. Press the OUT button 2.
The TAKE LED blinks and the Displays show the messages:
Set serial port No reply
Press TAKE to execute
Current:
Reply
4. Press the TAKE button again.
The Displays show the messages: