Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the MENU Command Sequence
38
Table 7: Summary of Basic RC-IR2 Operations
To execute this command: Press the following keys in this sequence:
Switch an Input to an Output # key (for the output) + # key (for the input)
1
Store/Recall a setup SHIFT + STO/RCL + # key (for the setup)
8.9 Choosing the AUTO STORE Current SETUP
Choose whether or not to save the current setup automatically, that is,
whether to save the machine’s status on power down, so that it returns to the
same status after cycling power.
To save the current setup automatically (when set OFF), do the following:
1. Press the MENU button until you reach the AUTO Store Current SETUP
command.
The MATRIX Display shows the message:
AUTO store current SETUP
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The Displays show the messages:
OUTkey 1: no AutoSave
2: AutoSave CURRENT setup
current:
NO save
3. Press the OUT button 2.
The TAKE LED blinks and the Displays show the messages:
Auto store CURRENT setup ?
Press TAKE to execute
Current:
NO save
4. Press the TAKE button again.
The Displays show the messages:
AUTOSAVE mode
changed
Current:
AutoSave
8.10 Identifying the MACHINE
Display essential information (the product name and version number) to
identify your machine, for example, for technical support purposes.
To identify your machine, do the following:
1 For example, press # 6 followed by # 2 to switch input 2 to output 6