Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the MENU Command Sequence
34
3. Press an OUT button from 1, 2, 3 or 4. For example, OUT button # 3 to set
the internal sync configuration.
The TAKE LED blinks and the MATRIX Display shows the message:
Press TAKE to configure
from INTERNAL (Input #1)
4. Press the TAKE button.
The Displays show the messages:
SWITCHING METHOD
changed
current:
From In #1
8.4 Choosing the EXTENDED KEYBOARD Setting
Section 6.6 describes how to connect a remote keyboard. Activate or
deactivate it by setting the extended Keyboard setting ON or OFF.
To set the extended KEYBOARD mode, do the following:
1. Press the MENU button until reaching the extended Keyboard setting.
The MATRIX Display shows the message:
extended KEYBOARD setting
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The Displays show the messages:
Outkey 1: External keys OFF
2: External keys ON
current:
X-key ON
1
3. Press the OUT button 1 to deactivate the External keys.
The TAKE LED blinks and the Displays show the messages:
Turn OFF external keys?
Press TAKE to execute
current:
X-key ON
4. Press the TAKE button.
The Displays show the messages:
External Keyboard mode
changed
current:
X-key OFF
1 Indicating that the external keys are currently activated